If you want to prune the wet branches of the trees in.
The additional moisture found on wet wood will not make any difference to the cutting process. It doesn't place any additional resistance on the chainsaw, and no additional effort is required to cut through it. However, as the wood is wet, sawdust will tend to stick to the chain instead of being blasted away by the air filter and exhaust.
No, it is not bad to cut the wet wood with your chainsaw. Dewdrops, raindrops, or the snow on the wood will not cause any harm to your chainsaw. It is, in fact, much easier to cut through the wet wood than dry wood because the extra moisture on the wood will act as a natural takedownstump.barted Reading Time: 9 mins.
Nov 14, Yup, cutting in the rain won't do the saw any harm, but if you wash your saw with a hose like your dad does, just be sure he runs them afterward to get all the moisture out of the saw. Rusty crank bearings can sure wreck your day!
Last edited: Nov 14, Estimated Reading Time: 6 mins. Dec 20, The cutting procedure for felling a tree with chainsaw begins with a “hinge cut” which is a roughly degree cut (30 degrees at the bottom and 60 degrees at the top) made into the side of the tree in the direction you want it to fall. The rule of thumb is to cut it to a depth of anywhere between 1/5th and 1/3rd the diameter of the tree/5(8).
There’s a common misconception about wet wood dulling chainsaw chains, but this isn’t really true. In fact, when they are running properly, chainsaw chains are ALWAYS wet. This is due to the bar oil lubrication. Without this, a chainsaw would be constant metal-on.
The moisture in wood is not pure water, but the tree's nourishing source. Many of these components will tend to bind a running chain saw.
Dry wood on the other hand has less of a effect and thus is easier to cut cleanly. It is also advised to give a used blade a wipe after a.
It is recommended that elderly and weak people not try to cut through a young tree because older and diseased wood will be easier to work with.
The first thing to do to prepare your chainsaw for use in temperatures under 40° F is to switch the winter/summer shutter on your saw to “winter” to activate the carburetor pre-heater system, if your chainsaw has this feature. Leaving the shutter on the summer position could result in carburetor icing, causing the machine to perform poorly. Jul 07, A sharp chainsaw chain will cut out large chips of wood and cut smoothly.
Blunt chains with dull teeth will gum their ways through the wood and kick out fine wood dust. Not only will a blunt chain cause smoke on dry wood it can also cause steam when cutting wet wood in cold conditions. I've always wondered what it would be like to cut a palm tree with my chainsaw. Now I know.~~~~~CLICK SHOW MORE~~~~~Thanks for watching! Please l.